Our services

Bulk Earthworks & Earthmoving Works in Sydney & NSW

CBEM delivers bulk earthworks and earthmoving works for subdivisions and civil developments in Sydney and regional NSW, including cut and fill, excavation and lot formation. The work is planned around design levels, ground conditions, drainage and the construction stages that follow.

Bulk Earthworks and Excavation Scope

  • Site preparation and stripping
  • Bulk excavation and cut and fill
  • Placement and compaction of engineered fill
  • Trimming of lots, road formations and building platforms
  • Material handling, import and off-site disposal
  • Erosion, sediment and temporary drainage controls

Cut and fill planning

We review the design surfaces and ground information before planning the excavation sequence and material movements. Suitable material is identified for reuse where the design and specification allow. Access, haul routes and temporary stockpiles are coordinated with drainage and utility works.

Material handling

Imported material and excavated material leaving the site need to meet the applicable specification and classification requirements. We coordinate the required assessment, transport and disposal arrangements, and retain the relevant material and disposal records. Unexpected ground conditions are referred to the project engineers or environmental consultants before affected work continues.

Compaction and verification

Fill placement is staged to suit the material, ground conditions and specified compaction requirements. We arrange geotechnical inspections and testing where required, check formation levels and compile the records needed for the next construction stage.

Bulk earthworks project experience

Leppington Gardens Stage 2 included approximately 36,000 m³ of bulk earthworks. At 80 Fourteenth Avenue, unsuitable soil was removed and replaced with suitable fill, followed by compaction, testing and compliance reporting.